VOLTMETERS & AMMETERS

Overview

Proteus VSM provides both AC and DC voltmeters and ammeters These operate in real time and can be wired into the circuit just like any other component. Once the simulation is started they display the voltage across their terminals or the current flowing through them in an easy to read digital format.

The FSD of the meters can be set to any of 100, 100m and 100u with a resolution of 3 significant figures and a maximum number of two decimal places by editing the meter component and selecting the required Display Range property.

The voltmeter models support an internal load resistance property which defaults to 100M but which can also be changed by editing the component. in the usual way. Leaving the value blank disables the load resistance element of the model.

The AC voltmeters and ammeters display true RMS values integrated over a user definable time constant.

A wattmeter is also provided which has three functions (active, re-active and apparent) that can be selected from the Edit Component dialogue form of the placed part. The default phase angle is set at 45 degrees; the correct angle for a given circuit can be computed by using either an analog graph or an oscilloscope.

The wattmeter is intended only for use with sine waveforms.